Aftermarket Backup/Front Camera Install Guides (D8/D9)
Dynavin 9: Click here for the general backup camera install diagram or for Mustang 2010-2014 cars, click here for installing an aftermarket backup camera into a Mustang 2010-2014.
Dynavin 8: Click here for the general backup camera install diagram or for Mustang 2010-2014 cars, click here for installing an aftermarket backup camera into a Mustang 2010-2014.
For installing a front camera with a Dynavin 8 or 9, connect the video RCA from the front camera to the yellow V-IN RCA port on the back of the unit. Connect the power wire from the front camera to the red CAMERA POWER wire on the included camera RCA harness or another 12V power source. To view the front camera image, go to the Dynavin's main menu and select "Media" > tap the onscreen button on the top left corner and select "AUX". Click here for the Front Camera Wiring Guide
If you want your backup camera to be on all the time so you can view the reverse image any time and/or you are installing in a Mustang 2010-2014, you will need to connect the red power wire on the backup camera to the red "CAMERA POWER" wire on included camera RCA harness.
See below for wiring diagrams:
Backup Camera Wiring Diagram Overview (Dynavin 9)
Front Camera Wiring Guide (Dynavin 8 or 9)
Backup Camera Wiring Diagram Overview (Dynavin 8)
Note: The Dynavin integrates with a few of the factory backup camera in the Mustang model radios: MST2010, MST2015L (base model), and MST2015H (premium model) and the camera adapters are included. The Dynavin can also integrate with some of the Volkswagen models (camera adapter sold separately).
For other applications, integrating a factory backup camera with an aftermarket radio --such as a Dynavin-- is typically not done (and not recommended) as parts to make them compatible are often expensive (or don't exist), and a highly experienced install technician is recommended.